3D Printers
DIY replacement kit universal for damaged 3D printer hot end, special for Anet A2 & A8 printer.
Pre-wired NTC3950 thermistor, 100K ohm, 1.1m in length.
12V 40W 6*20mm cartridge heater.
Aluminum heater block.
0.4mm output nozzle.
6mm diameter external thread extruder throat, 30mm length, suits for 1.75mm filament.
Resume Print: Use this feature to safely protect the power supply and help achieve long-time service time.
Stable Z-axis lead screw drives smoothly and steady. The movement of the build plate will be more stable.
To avoid printing errors, Filament End Sensor notifies you when filament breaks, runs out or wraps around the reel.
Box design with overhead gantry. Print materials: PLA, ABS, soft glue, wood, copper-containing, gradient, etc.
Resume Print: Use this feature to safely protect the power supply and help achieve long-time service time.
Stable Z-axis lead screw drives smoothly and steady. The movement of the build plate will be more stable.
To avoid printing errors, Filament End Sensor notifies you when filament breaks, runs out or wraps around the reel.
Box design with overhead gantry. Print materials: PLA, ABS, soft glue, wood, copper-containing, gradient, etc.
Resume Print: Use this feature to safely protect the power supply and help achieve long-time service time.
Stable Z-axis lead screw drives smoothly and steady. The movement of the build plate will be more stable.
To avoid printing errors, Filament End Sensor notifies you when filament breaks, runs out or wraps around the reel.
Box design with overhead gantry. Print materials: PLA, ABS, soft glue, wood, copper-containing, gradient, etc.
Resume Print: Use this feature to safely protect the power supply and help achieve long-time service time.
Stable Z-axis lead screw drives smoothly and steady. The movement of the build plate will be more stable.
To avoid printing errors, Filament End Sensor notifies you when filament breaks, runs out or wraps around the reel.
Box design with overhead gantry. Print materials: PLA, ABS, soft glue, wood, copper-containing, gradient, etc.
High-standard v-slot profile for stable printing.
V-slot profile and pulley for stable and smooth operation, low noise, wear resistance, long lasting.
Strict controls on details and quality.
Self-adhesive platform is convenient to pick up models and excellent adhesion.
Ergonomic nut design for easy and fast leveling.
45 degree display screen for easy usage.
Built-in power supply for motherboard is safe and secure.
High-standard v-slot profile for stable printing.
V-slot profile and pulley for stable and smooth operation, low noise, wear resistance, long lasting.
Strict controls on details and quality.
Self-adhesive platform is convenient to pick up models and excellent adhesion.
Ergonomic nut design for easy and fast leveling.
45 degree display screen for easy usage.
Built-in power supply for motherboard is safe and secure.
High-standard v-slot profile for stable printing.
V-slot profile and pulley for stable and smooth operation, low noise, wear resistance, long lasting.
Strict controls on details and quality.
Self-adhesive platform is convenient to pick up models and excellent adhesion.
Ergonomic nut design for easy and fast leveling.
45 degree display screen for easy usage.
Built-in power supply for motherboard is safe and secure.
High-standard v-slot profile for stable printing.
V-slot profile and pulley for stable and smooth operation, low noise, wear resistance, long lasting.
Strict controls on details and quality.
Self-adhesive platform is convenient to pick up models and excellent adhesion.
Ergonomic nut design for easy and fast leveling.
45 degree display screen for easy usage.
Built-in power supply for motherboard is safe and secure.
No more 3M Masking tape, No more glue stic and No more ABS juice.
No more PEI sheet replacement and Easy to print.
Easy to remove by bending and popping it off.
Repeated use, with high temperature resistance.
Key Features...
- Superior printing scale of 500x500x500mm, outstanding building volume.
- All In One (AIO) controller module served with separated controlling units and mechanic structures, further upscaling the printer.
- Dual bearing Delrin solid V wheels with unique V-slot rails generating, less noise and better performance.
- Industrial-grade circuit boards can continuously print for 200 hours without error, stable performance is guaranteed.
- Arrived semi-assembled, fully assemble the kit requires only 10 minutes.
Creality3D CR-10S5 Enlarged Version 3D Printer
500x500x500mm Large Volume Printing
- This 3D printer has the amazingly large volume for printing, which can continuously print for 200 hours without error. This large volume allows you to print small things and also large objects, no worry of getting cut because the object is too large.
DIY Kit
- Printer comes semi-assembled while solving the transportation problem, also save you a lot of time for assemble. You just need to take additional about 10 minutes to assemble the kit, and you can enjoy the fun of 3D printing.
Memory Card Offline Print
- Offline printing, save you trouble of getting wire for network for the printer, with the memory card, printing is more convenient.
Detailed Upgrades
- Airline industry hot swappable plugs, hand tighten nuts for heat bed leveling. Providing stable and excellent performance for the printing.
Key Features...
- Superior printing scale of 500x500x500mm, outstanding building volume.
- All In One (AIO) controller module served with separated controlling units and mechanic structures, further upscaling the printer.
- Dual bearing Delrin solid V wheels with unique V-slot rails generating, less noise and better performance.
- Industrial-grade circuit boards can continuously print for 200 hours without error, stable performance is guaranteed.
- Arrived semi-assembled, fully assemble the kit requires only 10 minutes.
Creality3D CR-10S5 Enlarged Version 3D Printer
500x500x500mm Large Volume Printing
This 3D printer has the amazingly large volume for printing, which can continuously print for 200 hours without error. This large volume allows you to print small things
and also large objects, no worry of getting cut because the object is too large.
DIY Kit
Printer comes semi-assembled while solving the transportation problem, also save you a lot of time for assemble. You just need to take additional about 10 minutes to
assemble the kit, and you can enjoy the fun of 3D printing.
Memory Card Offline Print
Offline printing, save you trouble of getting wire for network for the printer, with the memory card, printing is more convenient.
Detailed Upgrades
Airline industry hot swappable plugs, hand tighten nuts for heat bed leveling. Providing stable and excellent performance for the printing.
Key Features...
- Superior printing scale of 500x500x500mm, outstanding building volume.
- All In One (AIO) controller module served with separated controlling units and mechanic structures, further upscaling the printer.
- Dual bearing Delrin solid V wheels with unique V-slot rails generating, less noise and better performance.
- Industrial-grade circuit boards can continuously print for 200 hours without error, stable performance is guaranteed.
- Arrived semi-assembled, fully assemble the kit requires only 10 minutes.
Creality3D CR-10S5 Enlarged Version 3D Printer
500x500x500mm Large Volume Printing
This 3D printer has the amazingly large volume for printing, which can continuously print for 200 hours without error. This large volume allows you to print small things
and also large objects, no worry of getting cut because the object is too large.
DIY Kit
Printer comes semi-assembled while solving the transportation problem, also save you a lot of time for assemble. You just need to take additional about 10 minutes to
assemble the kit, and you can enjoy the fun of 3D printing.
Memory Card Offline Print
Offline printing, save you trouble of getting wire for network for the printer, with the memory card, printing is more convenient.
Detailed Upgrades
Airline industry hot swappable plugs, hand tighten nuts for heat bed leveling. Providing stable and excellent performance for the printing.
Key Features...
- Double gear extrusion mechanism and auto leveling for higher performance experience.
- Easy assembly, delivery with three sets, just need about 10 minutes to assemble well.
- Prints size of 300 * 300 * 400 mm/11.81 * 11.81 * 15.75 inch. No longer will you be limited to small models.
- Industrial-grade PCB can continuously print for 200 hours without error, but with matures printing technology and stable performance.
Creality3D CR-10S 3D Printer
300 * 300 * 400 mm Large Volume Printing
300 * 300 * 400 mm/11.81 * 11.81 * 15.75 inch large volume for printing, which can continuously print for 200 hours without pressure. This large volume allows you to
print small things and also large objects, no more limit to only small models.
Easy DIY Kit
Printer delivered with three sets, save you a lot of time for assemble. You just need to take additional about 10 minutes to assemble the kit, and you can enjoy the fun of
3D printing.
Machine Precision
High precision imported Aluminum V-slot Bearing + precision roller with high positioning accuracy, move smoothly,print faster.
Heating Bed
Industrial grade aluminum alloy platform and special tempered glass to ensure the formation of flat and to prevent wear and tear. Easy for you to take out the model
without damage or tear.
Easy Wiring:
All wires are attached with labels, no need to worry about wrong wiring. All you have to do is hook everything up accordingly.
Key Features...
- Double gear extrusion mechanism and auto leveling for higher performance experience.
- Easy assembly, delivery with three sets, just need about 10 minutes to assemble well.
- Prints size of 300 * 300 * 400 mm/11.81 * 11.81 * 15.75 inch. No longer will you be limited to small models.
- Industrial-grade PCB can continuously print for 200 hours without error, but with matures printing technology and stable performance.
Creality3D CR-10S 3D Printer
300 * 300 * 400 mm Large Volume Printing
300 * 300 * 400 mm/11.81 * 11.81 * 15.75 inch large volume for printing, which can continuously print for 200 hours without pressure. This large volume allows you to
print small things and also large objects, no more limit to only small models.
Easy DIY Kit
Printer delivered with three sets, save you a lot of time for assemble. You just need to take additional about 10 minutes to assemble the kit, and you can enjoy the fun of
3D printing.
Machine Precision
High precision imported Aluminum V-slot Bearing + precision roller with high positioning accuracy, move smoothly,print faster.
Heating Bed
Industrial grade aluminum alloy platform and special tempered glass to ensure the formation of flat and to prevent wear and tear. Easy for you to take out the model
without damage or tear.
Easy Wiring:
All wires are attached with labels, no need to worry about wrong wiring. All you have to do is hook everything up accordingly.
Key Features...
- Double gear extrusion mechanism and auto leveling for higher performance experience.
- Easy assembly, delivery with three sets, just need about 10 minutes to assemble well.
- Prints size of 300 * 300 * 400 mm/11.81 * 11.81 * 15.75 inch. No longer will you be limited to small models.
- Industrial-grade PCB can continuously print for 200 hours without error, but with matures printing technology and stable performance.
Creality3D CR-10S 3D Printer
300 * 300 * 400 mm Large Volume Printing
300 * 300 * 400 mm/11.81 * 11.81 * 15.75 inch large volume for printing, which can continuously print for 200 hours without pressure. This large volume allows you to
print small things and also large objects, no more limit to only small models.
Easy DIY Kit
Printer delivered with three sets, save you a lot of time for assemble. You just need to take additional about 10 minutes to assemble the kit, and you can enjoy the fun of
3D printing.
Machine Precision
High precision imported Aluminum V-slot Bearing + precision roller with high positioning accuracy, move smoothly,print faster.
Heating Bed
Industrial grade aluminum alloy platform and special tempered glass to ensure the formation of flat and to prevent wear and tear. Easy for you to take out the model
without damage or tear.
Easy Wiring:
All wires are attached with labels, no need to worry about wrong wiring. All you have to do is hook everything up accordingly.
Key Features...
- Dual color nozzles allow you to make two color printing.
- Large size touch screen, humanized design, easy operation.
- Glue-free printing platform, deduce adhesion after cooling, easy to take out the models.
- Dual fan cooling system, fast cooling, better cooling effect and higher efficiency.
CREALITY CR-X 3D Printer
Integrated Design.
The exterior design of the profiled sheet metal base is used to store most of the electronic components in the sheet metal bottom case.
Carboloy Silicon Printing Platform.
No need to use glue, perfect bonding with filament at 60℃, reduce adhesion after cooling.
The model and platform are easy to separate, and the model is easy to remove after printing is done.
Automatic Adjustment of Broadband Power Supply.
Widescreen power supply for 110-240V voltage environment. No need to switch, safer and easier to use. It is necessary to adjust the voltage range of 110/220V according
to different regions.
All Metal Extruder. Single Wire Design.
Better strength, longer service life and self-contained elastic adjustment device, giving you a smoother printing experience.
Only need one wire to connect the base and the gantry, which makes it looks compact and beautiful.
Large Leveling Nuts. Stable Printing.
Ergonomic design large leveling nuts, easy to adjust. The CR-X machine is fully supported. The bottom slide block has 8 pulleys and the bottom profile is relatively solid.
This unique design allows the entire machine to run smoothly when printing.
Key Features...
- Integrated one-piece appearance, professional and outstanding.
- Humanized design, easy operation.
- High-quality hardwares ensure stable performance.
- Highly integrated module provides fluent printing.
- Patented technology, precise, long time printing, smooth and evenly.
- Quick remove self-adhesive platform, easy to take out the models.
Key Features...
- Imported V-Slot aluminum body structure, ensure a better performance and fluent printing
- Support printing methods like TF card/ On Line / Off Line, very convenient for those with no wired network.
- 220*220*250mm printing size, enough for you to try ptinting many kinds of models, no limit to only small ones.
- Advanced power supply to ensure safer and faster heating of all necessary components.
CREALITY 3D Ender-3 PRO 3D Printer
Superior Printing Surface
All new state of the art 'C-MAG' magnetic bed,is completely removable and flexible.The textured surface adheres to all types of filament better than traditional methods
such as tape, glue, or hairspray. No more model warping on larger prints! Once the model is finished printing, remove the magnetic upper from the lower and bend or flex
the print surface to watch the model effortlessly pop off the printing surface.
Precisely Manufactured
High precision CNC machining techniques used for all metal brackets and mounts, guarantees precise positioning and an all around more stable structure.
Enhanced Bed Leveling
All new ergonomically designed larger bed leveling nuts makes leveling the bed much easier and more precise, which makes sure you can spend more time printing, and
less time leveling.
DIY Assembly KIT
Enjoy more fun of DIY, easier to realize the innovative transformation of the appearance and meet more of your printing needs.
Resume Printing While Power Off
This 3D printer has the function that safely protect the power supply, and can help achieving long time printing.
Key Features...
Equipped with V-slot cooperate with Prusa I3 frame, higher performance.
Extremely innovative design, following the step of the trend, integrating with classic elements.
Printing size 220*220*250mm, plenty enough for you to print many kinds of models.
Only 10 minutes with 20 screws ssembly before the first printing, simple assembly but more stable performance.
CREALITY Ender-3 3D Printer
- Big Printing Size
Super Printing size with one-piece structure, save space but building the world.
- Advanced Technology
MK-10 Extruder greatly reduces plugging risk and bad extrusion. Adopts V-slot with wheel, which is noiseless, smoothly and durable. You can enjoy the fun for 3D printing and no need to worry about malfunctions.
- Power Protections
Safely protected power supply and additional power cut protection function, long time printing will no longer be a problem. These functions will protect the machine during a long working time.
- Fast Heating
Reach 110℃ for hotbed in about 5 minutes, meet the needs of fast heating.
- High Precision
CNC machining of Y-rail mounting groove to make sure precise positioning and keep the stable frame with High-precision printing quality. Big hand twist nut, make the print platform easier to level.
Key Features...
- Double gear extrusion mechanism and auto leveling for higher performance experience.
- Easy assembly, delivery with three sets, just need about 10 minutes to assemble well.
- Prints size of 300 * 300 * 400 mm/11.81 * 11.81 * 15.75 inch. No longer will you be limited to small models.
- Industrial-grade PCB can continuously print for 200 hours without error, but with matures printing technology and stable performance.
Creality3D CR-10S 3D Printer
300 * 300 * 400 mm Large Volume Printing
300 * 300 * 400 mm/11.81 * 11.81 * 15.75 inch large volume for printing, which can continuously print for 200 hours without pressure. This large volume allows you to
print small things and also large objects, no more limit to only small models.
Easy DIY Kit
Printer delivered with three sets, save you a lot of time for assemble. You just need to take additional about 10 minutes to assemble the kit, and you can enjoy the fun of
3D printing.
Machine Precision
High precision imported Aluminum V-slot Bearing + precision roller with high positioning accuracy, move smoothly,print faster.
Heating Bed
Industrial grade aluminum alloy platform and special tempered glass to ensure the formation of flat and to prevent wear and tear. Easy for you to take out the model
without damage or tear.
Easy Wiring:
All wires are attached with labels, no need to worry about wrong wiring. All you have to do is hook everything up accordingly.
Key Features...
- Double gear extrusion mechanism and auto leveling for higher performance experience.
- Easy assembly, delivery with three sets, just need about 10 minutes to assemble well.
- Prints size of 300 * 300 * 400 mm/11.81 * 11.81 * 15.75 inch. No longer will you be limited to small models.
- Industrial-grade PCB can continuously print for 200 hours without error, but with matures printing technology and stable performance.
Creality3D CR-10S 3D Printer
300 * 300 * 400 mm Large Volume Printing
300 * 300 * 400 mm/11.81 * 11.81 * 15.75 inch large volume for printing, which can continuously print for 200 hours without pressure. This large volume allows you to
print small things and also large objects, no more limit to only small models.
Easy DIY Kit
Printer delivered with three sets, save you a lot of time for assemble. You just need to take additional about 10 minutes to assemble the kit, and you can enjoy the fun of
3D printing.
Machine Precision
High precision imported Aluminum V-slot Bearing + precision roller with high positioning accuracy, move smoothly,print faster.
Heating Bed
Industrial grade aluminum alloy platform and special tempered glass to ensure the formation of flat and to prevent wear and tear. Easy for you to take out the model
without damage or tear.
Easy Wiring:
All wires are attached with labels, no need to worry about wrong wiring. All you have to do is hook everything up accordingly.
Key Features...
- Double gear extrusion mechanism and auto leveling for higher performance experience.
- Easy assembly, delivery with three sets, just need about 10 minutes to assemble well.
- Prints size of 300 * 300 * 400 mm/11.81 * 11.81 * 15.75 inch. No longer will you be limited to small models.
- Industrial-grade PCB can continuously print for 200 hours without error, but with matures printing technology and stable performance.
Creality3D CR-10S 3D Printer
300 * 300 * 400 mm Large Volume Printing
300 * 300 * 400 mm/11.81 * 11.81 * 15.75 inch large volume for printing, which can continuously print for 200 hours without pressure. This large volume allows you to
print small things and also large objects, no more limit to only small models.
Easy DIY Kit
Printer delivered with three sets, save you a lot of time for assemble. You just need to take additional about 10 minutes to assemble the kit, and you can enjoy the fun of
3D printing.
Machine Precision
High precision imported Aluminum V-slot Bearing + precision roller with high positioning accuracy, move smoothly,print faster.
Heating Bed
Industrial grade aluminum alloy platform and special tempered glass to ensure the formation of flat and to prevent wear and tear. Easy for you to take out the model
without damage or tear.
Easy Wiring:
All wires are attached with labels, no need to worry about wrong wiring. All you have to do is hook everything up accordingly.
Key Features...
- Integrated one-piece appearance, professional and outstanding.
- Humanized design, easy operation.
- High-quality hardwares ensure stable performance.
- Highly integrated module provides fluent printing.
- Patented technology, precise, long time printing, smooth and evenly.
- Quick remove self-adhesive platform, easy to take out the models.
Key Features...
- Imported V-Slot aluminum body structure, ensure a better performance and fluent printing
- Support printing methods like TF card/ On Line / Off Line, very convenient for those with no wired network.
- 220*220*250mm printing size, enough for you to try ptinting many kinds of models, no limit to only small ones.
- Advanced power supply to ensure safer and faster heating of all necessary components.
CREALITY 3D Ender-3 PRO 3D Printer
Superior Printing Surface
All new state of the art 'C-MAG' magnetic bed,is completely removable and flexible.The textured surface adheres to all types of filament better than traditional methods
such as tape, glue, or hairspray. No more model warping on larger prints! Once the model is finished printing, remove the magnetic upper from the lower and bend or flex
the print surface to watch the model effortlessly pop off the printing surface.
Precisely Manufactured
High precision CNC machining techniques used for all metal brackets and mounts, guarantees precise positioning and an all around more stable structure.
Enhanced Bed Leveling
All new ergonomically designed larger bed leveling nuts makes leveling the bed much easier and more precise, which makes sure you can spend more time printing, and
less time leveling.
DIY Assembly KIT
Enjoy more fun of DIY, easier to realize the innovative transformation of the appearance and meet more of your printing needs.
Resume Printing While Power Off
This 3D printer has the function that safely protect the power supply, and can help achieving long time printing.
Key Features...
Equipped with V-slot cooperate with Prusa I3 frame, higher performance.
Extremely innovative design, following the step of the trend, integrating with classic elements.
Printing size 220*220*250mm, plenty enough for you to print many kinds of models.
Only 10 minutes with 20 screws ssembly before the first printing, simple assembly but more stable performance.
CREALITY Ender-3 3D Printer
- Big Printing Size
Super Printing size with one-piece structure, save space but building the world.
- Advanced Technology
MK-10 Extruder greatly reduces plugging risk and bad extrusion. Adopts V-slot with wheel, which is noiseless, smoothly and durable. You can enjoy the fun for 3D printing and no need to worry about malfunctions.
- Power Protections
Safely protected power supply and additional power cut protection function, long time printing will no longer be a problem. These functions will protect the machine during a long working time.
- Fast Heating
Reach 110℃ for hotbed in about 5 minutes, meet the needs of fast heating.
- High Precision
CNC machining of Y-rail mounting groove to make sure precise positioning and keep the stable frame with High-precision printing quality. Big hand twist nut, make the print platform easier to level.
--Easy to use, the back glue has been pasted, easy operation.
--Flexible, detachable, very well adheres to the magnet.
--Suitable for all kinds of fibers, especially for PLA and ABS.
--Free cleaning, just bend the board slightly, then cool and then print.
--Never warp, never rust.
--3M adhesive is easy to install.
--Fast heating, silicone rubber hot bed, low power, high temperature, uniform heat transfer, long life, and high thermal efficiency conversion.
--Wonderful silica gel heater for your 3D printer heat-bed.
--Waterproof and non-toxic.
--Thick paper, good filtration, saving materials.
--Very practical 3D printer filter funnel.
--Use high-quality paper, durable and environmentally friendly.
--Durable, easy to use, sturdy, 3D printer accessories.
--The Funnel is designed to be collapsible or folding, easy to use and store.
Use removable A4988 or DRV8825 compatible stepping driver.
The extension board can be used for engraving machine or 3D printer driver.
Compatible with GRBL 0.8. Open-source firmware operated on Arduino UNO, converting G code command into stepping signal.
PWM spindle and direction pin, 4 shaft support (X, Y, Z, A - you can copy X, Y, Z or use pin D12 and D13 customize firmware perform complete shaft 4).
Compact design, stepping motor can connect 4 pin connectors or be soldered.
The operation system:MAC/linux/Windowsxp/vista/7/8/10.
Power rating:350w and filament diameter:1.75mm.
printing speed:180mm/S,normal 30-60mm/S and nozzle diameter:standard 0.4mm.
- HUAWE Pocket Photo Printer,Print Your Colorful Life.
- Made of premium quality material, non-deforming and smooth edge, solid and wear resistant for a long time use.
- Fine workmanship and stylish design.
- No smell, anti-bacteria, strongly wear resistant
-- Copper plated holes, high strength material and long life service.
-- Resistance between 1.0 and 1.2 ohm.
-- Very good in combination with RUMBA or Taurino Power.
-- Power input: 12V or 24v, copper plated holes.
--Fit for Prusa i3 MK3.
--Made of good material, ensures long service time.
--A good part for 3D printer.
Using 468MP back glue, has strong adhesion.
Perfect accessories for 3D Printer.
Easy to operate and convenient to use.
TFF touch screen.
Power failure protection.
Rigid metal frame.
Multi-language, detachable platform, auxi liary leveling.
Front view full color touch screen, simplify the machine's operation.
Using TMC2208 motor silent drive, quiet and no noise.
The large print size is 300 * 300 * 400mm, which meets the user's large print requirements.
Double Z axis: dual motor + double screw + double Z axis limit switch to ensure the stability and flatness of the printing platform.
Supports pause and resume when the material is cut to prevent accidents during printing.
3.5-inch high-definition touch screen, easy to operate and support multiple languages.
Using TMC2208 motor silent drive, quiet and no noise.
The large print size is 300 * 300 * 400mm, which meets the user's large print requirements.
Double Z axis: dual motor + double screw + double Z axis limit switch to ensure the stability and flatness of the printing platform.
Supports pause and resume when the material is cut to prevent accidents during printing.
3.5-inch high-definition touch screen, easy to operate and support multiple languages.
Core xy structure, stable machine structure, fast printing speed, high precision, quiet and no noise.
Large print size 300 * 300 * 330mm, meet users' large print requirements.
Double Z axis: 4 optical axis + 2 screw rods + 2 Z axis limit switches to ensure the stability and flatness of the printing platform.
It supports the functions of material pause and power failure, which saves time without waste.
3.5-inch high-definition touch screen, easy to operate and support multiple languages.
Core xy structure, stable machine structure, fast printing speed, high precision, quiet and no noise.
Large print size 300 * 300 * 330mm, meet users' large print requirements.
Double Z axis: 4 optical axis + 2 screw rods + 2 Z axis limit switches to ensure the stability and flatness of the printing platform.
It supports the functions of material pause and power failure, which saves time without waste.
3.5-inch high-definition touch screen, easy to operate and support multiple languages.
TFF touch screen.
Power failure protection.
Rigid metal frame.
Multi-language, detachable platform, auxi liary leveling.
Front view full color touch screen, simplify the machine's operation.
--Perfect solution for having your pen at hand. Designed for journals, notebooks, planners, calendars.
--Adjustable Loop Diameter, easy and convenient to use.
--The elastic loop accommodates many sizes of pens and pencils.
--The purpose of the pen loop is to make your life easier. The loop firmly holds your pen, strong adhesive and special elastic.
Eco-friendly material, nontoxic and wear resistant.
Firm metal clip inside to tightly hold the papers.
Comes with leather cover for A4 size paper.
A wonderful handy tool for student and office workers.
![High Capacity Toner Cartridge Black for Xerox S1810 S2010 S2011 S2220 S2420 S252 Standard capacity cartridge [5K page]](http://wholesale.monster/shop_html/image/thumbnails/20/b0/High_Capacity_Toner_Cartridge_Black_for_Xerox_S1810_S2010_S2011_S2220_S2420_S252_Standard_capacity_cartridge__5K_page_-133893-250x250.jpeg)
Made of high quality material, eco-friendly, nontoxic, durable.
Bright color, strong stereoscopic effect and clear effect.
Strict production process, easy to install and use.
Compatible with Xerox:S1810 S2010 S2011 S2220 S2420 S2520.
--3D Printer, Laser engraving, and CNC Cutting.
--Support materials: wood, paper, plastic, leather, etc.
--File format: SVG, BMP, NG, PG, DXF.
--Laser power: less than 0.5W.
--The modules are interchangeable and can be assembled quickly and universally.
Specifications:
--NTC3950 Thermistor
Material: High Temperature Teflon(200℃)
Resistance: at 25°C=100K ohm
Cable Length: Approx. 1.1m
Working Temperature Range: -40℃~+300℃
-------
--Extruder Throat
Material: Stainless Steel & Teflon
External thread: M6
Inner diameter: 2mm
Length: 30mm
Filament diameter: 1.75mm
Input diameter of Teflon tube: 2.3mm
Output diameter of Teflon tube: 4mm
-------
--Nozzle
Color: gold
Material: Brass
Size: 6 * 13mm
Input Diameter: 1.75mm
Output Diameter: 0.4mm
External Thread Diameter: 6mm
-------
--Heater
Material: Stainless Steel
Voltage: 12V
Power: 40W
Wire Length: Approx. 1m
Diameter: 6mm
Length: 20mm
-------
--Heater Block
Material: Aluminum
Dimensions: 2 * 2 * 1cm / 0.8 * 0.8 * 0.4in(LWH)
Nozzle and nozzle hole: M6
Heater mounting hole diameter: 6mm
Mounting screw hole: M3;
Thermocouple mounting hole: M3
Suits for: Anet A2 & A8 & A9 3D Printer
Packing List:
1 * Set of Hot End
Note:
Please pay attention to the parameter before placing an order.
DIY replacement kit universal for damaged 3D printer hot end, special for Anet A2 & A8 printer.
Pre-wired NTC3950 thermistor, 100K ohm, 1.1m in length.
12V 40W 6*20mm cartridge heater.
Aluminum heater block.
0.4mm output nozzle.
6mm diameter external thread extruder throat, 30mm length, suits for 1.75mm filament.
Specification
Product Category: 3D Printer
Brand: Creality
Model: Ender-5 Plus
Type: DIY
Material (Frames): Aluminium Extrusion
Platform board: Aluminum Alloy
Nozzle quantity: Single
Nozzle diameter: 0.4mm
Nozzle temperature: 0 to 260 degree
Product forming size: 350 * 350 * 400mm
Layer thickness: 0.1-0.4mm
Memory card offline print: TF card
LCD Screen: Yes
Print speed: Recommend 60mm/s
Platform temperature: 0 to 110℃
Supporting material: ABS,PLA
Material diameter: 1.75mm
Language: English
Model supporting function: Yes
XY-axis positioning accuracy: 0.012mm
Voltage: 110V/220V
Working Power: Input: 100-240V AC; Output: DC 24V 21A; Max25A
Host computer software: Cura,Repetier-Host,Simplify3D
Packing Type: Assembled packing
System support: Windows XP / Vista / 7/10 MAC Linux
Connector Type: TF card,USB
Product weight: 18.2000 kg
Package weight: 23.8000 kg
Product size (L x W x H): 63.20 x 66.60 x 61.90 cm / 24.88 x 26.22 x 24.37 inches
Package size (L x W x H): 73.00 x 74.00 x 31.00 cm / 28.74 x 29.13 x 12.2 inches
Features:
● Auto Bed Leveling Pre-Installed: With BL Touch as configured. You just plug them in and start printing! It can precisely measure the tilt of the Bed surface, offers the automatic compensation for the Z-axis for unevenness of the platform plate, easy to solve the printing failure caused by the unevenness of the platform and provide reliable operation with all build surfaces.
Packing list:
1 x 3D Printer
1 x Set of Accessories
Notice:
All images and descriptions are for illustrative purposes only. We recommend you could check with sales for exact offers if need.
Resume Print: Use this feature to safely protect the power supply and help achieve long-time service time.
Stable Z-axis lead screw drives smoothly and steady. The movement of the build plate will be more stable.
To avoid printing errors, Filament End Sensor notifies you when filament breaks, runs out or wraps around the reel.
Box design with overhead gantry. Print materials: PLA, ABS, soft glue, wood, copper-containing, gradient, etc.
Specification
Product Category: 3D Printer
Brand: Creality
Model: Ender-5 Plus
Type: DIY
Material (Frames): Aluminium Extrusion
Platform board: Aluminum Alloy
Nozzle quantity: Single
Nozzle diameter: 0.4mm
Nozzle temperature: 0 to 260 degree
Product forming size: 350 * 350 * 400mm
Layer thickness: 0.1-0.4mm
Memory card offline print: TF card
LCD Screen: Yes
Print speed: Recommend 60mm/s
Platform temperature: 0 to 110℃
Supporting material: ABS,PLA
Material diameter: 1.75mm
Language: English
Model supporting function: Yes
XY-axis positioning accuracy: 0.012mm
Voltage: 110V/220V
Working Power: Input: 100-240V AC; Output: DC 24V 21A; Max25A
Host computer software: Cura,Repetier-Host,Simplify3D
Packing Type: Assembled packing
System support: Windows XP / Vista / 7/10 MAC Linux
Connector Type: TF card,USB
Product weight: 18.2000 kg
Package weight: 23.8000 kg
Product size (L x W x H): 63.20 x 66.60 x 61.90 cm / 24.88 x 26.22 x 24.37 inches
Package size (L x W x H): 73.00 x 74.00 x 31.00 cm / 28.74 x 29.13 x 12.2 inches
Features:
● Auto Bed Leveling Pre-Installed: With BL Touch as configured. You just plug them in and start printing! It can precisely measure the tilt of the Bed surface, offers the automatic compensation for the Z-axis for unevenness of the platform plate, easy to solve the printing failure caused by the unevenness of the platform and provide reliable operation with all build surfaces.
Packing list:
1 x 3D Printer
1 x Set of Accessories
Notice:
All images and descriptions are for illustrative purposes only. We recommend you could check with sales for exact offers if need.
Resume Print: Use this feature to safely protect the power supply and help achieve long-time service time.
Stable Z-axis lead screw drives smoothly and steady. The movement of the build plate will be more stable.
To avoid printing errors, Filament End Sensor notifies you when filament breaks, runs out or wraps around the reel.
Box design with overhead gantry. Print materials: PLA, ABS, soft glue, wood, copper-containing, gradient, etc.
Specification
Product Category: 3D Printer
Brand: Creality
Model: Ender-5 Plus
Type: DIY
Material (Frames): Aluminium Extrusion
Platform board: Aluminum Alloy
Nozzle quantity: Single
Nozzle diameter: 0.4mm
Nozzle temperature: 0 to 260 degree
Product forming size: 350 * 350 * 400mm
Layer thickness: 0.1-0.4mm
Memory card offline print: TF card
LCD Screen: Yes
Print speed: Recommend 60mm/s
Platform temperature: 0 to 110℃
Supporting material: ABS,PLA
Material diameter: 1.75mm
Language: English
Model supporting function: Yes
XY-axis positioning accuracy: 0.012mm
Voltage: 110V/220V
Working Power: Input: 100-240V AC; Output: DC 24V 21A; Max25A
Host computer software: Cura,Repetier-Host,Simplify3D
Packing Type: Assembled packing
System support: Windows XP / Vista / 7/10 MAC Linux
Connector Type: TF card,USB
Product weight: 18.2000 kg
Package weight: 23.8000 kg
Product size (L x W x H): 63.20 x 66.60 x 61.90 cm / 24.88 x 26.22 x 24.37 inches
Package size (L x W x H): 73.00 x 74.00 x 31.00 cm / 28.74 x 29.13 x 12.2 inches
Features:
● Auto Bed Leveling Pre-Installed: With BL Touch as configured. You just plug them in and start printing! It can precisely measure the tilt of the Bed surface, offers the automatic compensation for the Z-axis for unevenness of the platform plate, easy to solve the printing failure caused by the unevenness of the platform and provide reliable operation with all build surfaces.
Packing list:
1 x 3D Printer
1 x Set of Accessories
Notice:
All images and descriptions are for illustrative purposes only. We recommend you could check with sales for exact offers if need.
Resume Print: Use this feature to safely protect the power supply and help achieve long-time service time.
Stable Z-axis lead screw drives smoothly and steady. The movement of the build plate will be more stable.
To avoid printing errors, Filament End Sensor notifies you when filament breaks, runs out or wraps around the reel.
Box design with overhead gantry. Print materials: PLA, ABS, soft glue, wood, copper-containing, gradient, etc.
Specification
Product Category: 3D Printer
Brand: Creality
Model: Ender-5 Plus
Type: DIY
Material (Frames): Aluminium Extrusion
Platform board: Aluminum Alloy
Nozzle quantity: Single
Nozzle diameter: 0.4mm
Nozzle temperature: 0 to 260 degree
Product forming size: 350 * 350 * 400mm
Layer thickness: 0.1-0.4mm
Memory card offline print: TF card
LCD Screen: Yes
Print speed: Recommend 60mm/s
Platform temperature: 0 to 110℃
Supporting material: ABS,PLA
Material diameter: 1.75mm
Language: English
Model supporting function: Yes
XY-axis positioning accuracy: 0.012mm
Voltage: 110V/220V
Working Power: Input: 100-240V AC; Output: DC 24V 21A; Max25A
Host computer software: Cura,Repetier-Host,Simplify3D
Packing Type: Assembled packing
System support: Windows XP / Vista / 7/10 MAC Linux
Connector Type: TF card,USB
Product weight: 18.2000 kg
Package weight: 23.8000 kg
Product size (L x W x H): 63.20 x 66.60 x 61.90 cm / 24.88 x 26.22 x 24.37 inches
Package size (L x W x H): 73.00 x 74.00 x 31.00 cm / 28.74 x 29.13 x 12.2 inches
Features:
● Auto Bed Leveling Pre-Installed: With BL Touch as configured. You just plug them in and start printing! It can precisely measure the tilt of the Bed surface, offers the automatic compensation for the Z-axis for unevenness of the platform plate, easy to solve the printing failure caused by the unevenness of the platform and provide reliable operation with all build surfaces.
Packing list:
1 x 3D Printer
1 x Set of Accessories
Notice:
All images and descriptions are for illustrative purposes only. We recommend you could check with sales for exact offers if need.
Resume Print: Use this feature to safely protect the power supply and help achieve long-time service time.
Stable Z-axis lead screw drives smoothly and steady. The movement of the build plate will be more stable.
To avoid printing errors, Filament End Sensor notifies you when filament breaks, runs out or wraps around the reel.
Box design with overhead gantry. Print materials: PLA, ABS, soft glue, wood, copper-containing, gradient, etc.
Description:
Product name:3D Printer
File format: AMF,OBJ,STL
Layer thickness: 0.1-0.4mm
Material (Frames): Aluminium Extrusion
Packing Type: Assembled packing
Working Power: rated voltage 115v / 230v, output 24v
Print speed: Recommend 60mm / s
Type: DIY
Product forming size: 220*220*300mm
Brand: Creality
Platform board: Aluminum Base
Supporting material: ABS,PLA
Memory card offline print: TF card
Language: Chinese,English
Nozzle diameter: 0.4mm
Connector Type: TF card,USB
Nozzle quantity: Single
Model: Ender-5 Pro
System support: Win XP / Vista / 7/10 / Mac / Linux
Material diameter: 1.75mm
Model supporting function: Yes
Voltage: 110-240V
Host computer software: Cura,Repetier-Host,Simplify3D
Features:
Intelligent 3D space sturdy cubic structure
3D space for unique visual and haptic experience
Double performance in a single machine
Spatial frame for more stability
Removable platform for better printing
Ingeniously designed for geeks
Super-large molding size of 220 x 220 x 300mm to meet various printing requirements and diverse creations
Modular design DIY fun
Self-assembled modular parts to meet the assembly requirements of enthusiasts like you
Independent developed ultra-mute motherboard gives fewer noises and higher precision
Upgraded motherboard with solid filter and capacitor for better ESD protection and more stable performance TMC Ultra-quiet drive 256 subdivision for finer printing
Metal extruding unit stable feeding and wear-resisting
Double Y-axis, stable output
Dual Y-axis control system, synchronous operation, stable output, avoiding vibration caused by long-time printing
Packing list:
1 x 3D Printer
Note:
The picture may not reflect the actual color of the item.
High-standard v-slot profile for stable printing.
V-slot profile and pulley for stable and smooth operation, low noise, wear resistance, long lasting.
Strict controls on details and quality.
Self-adhesive platform is convenient to pick up models and excellent adhesion.
Ergonomic nut design for easy and fast leveling.
45 degree display screen for easy usage.
Built-in power supply for motherboard is safe and secure.
Description:
Product name:3D Printer
File format: AMF,OBJ,STL
Layer thickness: 0.1-0.4mm
Material (Frames): Aluminium Extrusion
Packing Type: Assembled packing
Working Power: rated voltage 115v / 230v, output 24v
Print speed: Recommend 60mm / s
Type: DIY
Product forming size: 220*220*300mm
Brand: Creality
Platform board: Aluminum Base
Supporting material: ABS,PLA
Memory card offline print: TF card
Language: Chinese,English
Nozzle diameter: 0.4mm
Connector Type: TF card,USB
Nozzle quantity: Single
Model: Ender-5 Pro
System support: Win XP / Vista / 7/10 / Mac / Linux
Material diameter: 1.75mm
Model supporting function: Yes
Voltage: 110-240V
Host computer software: Cura,Repetier-Host,Simplify3D
Features:
Intelligent 3D space sturdy cubic structure
3D space for unique visual and haptic experience
Double performance in a single machine
Spatial frame for more stability
Removable platform for better printing
Ingeniously designed for geeks
Super-large molding size of 220 x 220 x 300mm to meet various printing requirements and diverse creations
Modular design DIY fun
Self-assembled modular parts to meet the assembly requirements of enthusiasts like you
Independent developed ultra-mute motherboard gives fewer noises and higher precision
Upgraded motherboard with solid filter and capacitor for better ESD protection and more stable performance TMC Ultra-quiet drive 256 subdivision for finer printing
Metal extruding unit stable feeding and wear-resisting
Double Y-axis, stable output
Dual Y-axis control system, synchronous operation, stable output, avoiding vibration caused by long-time printing
Packing list:
1 x 3D Printer
Note:
The picture may not reflect the actual color of the item.
High-standard v-slot profile for stable printing.
V-slot profile and pulley for stable and smooth operation, low noise, wear resistance, long lasting.
Strict controls on details and quality.
Self-adhesive platform is convenient to pick up models and excellent adhesion.
Ergonomic nut design for easy and fast leveling.
45 degree display screen for easy usage.
Built-in power supply for motherboard is safe and secure.
Description:
Product name:3D Printer
File format: AMF,OBJ,STL
Layer thickness: 0.1-0.4mm
Material (Frames): Aluminium Extrusion
Packing Type: Assembled packing
Working Power: rated voltage 115v / 230v, output 24v
Print speed: Recommend 60mm / s
Type: DIY
Product forming size: 220*220*300mm
Brand: Creality
Platform board: Aluminum Base
Supporting material: ABS,PLA
Memory card offline print: TF card
Language: Chinese,English
Nozzle diameter: 0.4mm
Connector Type: TF card,USB
Nozzle quantity: Single
Model: Ender-5 Pro
System support: Win XP / Vista / 7/10 / Mac / Linux
Material diameter: 1.75mm
Model supporting function: Yes
Voltage: 110-240V
Host computer software: Cura,Repetier-Host,Simplify3D
Features:
Intelligent 3D space sturdy cubic structure
3D space for unique visual and haptic experience
Double performance in a single machine
Spatial frame for more stability
Removable platform for better printing
Ingeniously designed for geeks
Super-large molding size of 220 x 220 x 300mm to meet various printing requirements and diverse creations
Modular design DIY fun
Self-assembled modular parts to meet the assembly requirements of enthusiasts like you
Independent developed ultra-mute motherboard gives fewer noises and higher precision
Upgraded motherboard with solid filter and capacitor for better ESD protection and more stable performance TMC Ultra-quiet drive 256 subdivision for finer printing
Metal extruding unit stable feeding and wear-resisting
Double Y-axis, stable output
Dual Y-axis control system, synchronous operation, stable output, avoiding vibration caused by long-time printing
Packing list:
1 x 3D Printer
Note:
The picture may not reflect the actual color of the item.
High-standard v-slot profile for stable printing.
V-slot profile and pulley for stable and smooth operation, low noise, wear resistance, long lasting.
Strict controls on details and quality.
Self-adhesive platform is convenient to pick up models and excellent adhesion.
Ergonomic nut design for easy and fast leveling.
45 degree display screen for easy usage.
Built-in power supply for motherboard is safe and secure.
Description:
Product name:3D Printer
File format: AMF,OBJ,STL
Layer thickness: 0.1-0.4mm
Material (Frames): Aluminium Extrusion
Packing Type: Assembled packing
Working Power: rated voltage 115v / 230v, output 24v
Print speed: Recommend 60mm / s
Type: DIY
Product forming size: 220*220*300mm
Brand: Creality
Platform board: Aluminum Base
Supporting material: ABS,PLA
Memory card offline print: TF card
Language: Chinese,English
Nozzle diameter: 0.4mm
Connector Type: TF card,USB
Nozzle quantity: Single
Model: Ender-5 Pro
System support: Win XP / Vista / 7/10 / Mac / Linux
Material diameter: 1.75mm
Model supporting function: Yes
Voltage: 110-240V
Host computer software: Cura,Repetier-Host,Simplify3D
Features:
Intelligent 3D space sturdy cubic structure
3D space for unique visual and haptic experience
Double performance in a single machine
Spatial frame for more stability
Removable platform for better printing
Ingeniously designed for geeks
Super-large molding size of 220 x 220 x 300mm to meet various printing requirements and diverse creations
Modular design DIY fun
Self-assembled modular parts to meet the assembly requirements of enthusiasts like you
Independent developed ultra-mute motherboard gives fewer noises and higher precision
Upgraded motherboard with solid filter and capacitor for better ESD protection and more stable performance TMC Ultra-quiet drive 256 subdivision for finer printing
Metal extruding unit stable feeding and wear-resisting
Double Y-axis, stable output
Dual Y-axis control system, synchronous operation, stable output, avoiding vibration caused by long-time printing
Packing list:
1 x 3D Printer
Note:
The picture may not reflect the actual color of the item.
High-standard v-slot profile for stable printing.
V-slot profile and pulley for stable and smooth operation, low noise, wear resistance, long lasting.
Strict controls on details and quality.
Self-adhesive platform is convenient to pick up models and excellent adhesion.
Ergonomic nut design for easy and fast leveling.
45 degree display screen for easy usage.
Built-in power supply for motherboard is safe and secure.
Description:
Name: Double Sided Textured Powder Coated Steel Sheet
Type: MK3/SMK2.5 hot bed steel plate
Applicable models: for Prusa I3 MK3/SMK2.5 3D printer
Package included:
1*Spring Steel Sheet
Note:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
No more 3M Masking tape, No more glue stic and No more ABS juice.
No more PEI sheet replacement and Easy to print.
Easy to remove by bending and popping it off.
Repeated use, with high temperature resistance.
Disclaimer:
- Please read and follow the user manual carefully before you assemble or operate the 3D printer.
- Modification and customization of the 3D printer are strictly forbidden. We will take no responsibility for any problems resulting from modifications.
- Always use the correct AC voltage for your region.
- Please do not place the 3D printer near flammable / combustible materials, or any heat sources.
- Use the 3D printer only in properly ventilated areas. Maintain a safe distance from the printer.
Specification
- Brand:Creality3D
- Type:DIY
- Model:CR - 10s5
- Engraving Accuracy:+ / -0.1mm
- Frame material:Aluminum
- Nozzle diameter:0.4mm
- Product forming size:500 x 500 x 500mm
- Memory card offline print:SD card
- Print speed:normally 60 – 80mm/s, max. 150mm/s
- Supporting material:Wood,Copper,ABS,TPU,Carbon Fiber,PLA
- Material diameter:1.75mm
- File format:STL,G-code,OBJ
- Host computer software:Repetier-Host,Cura,Simplify3D
- Packing Type:un-assembled packing
- System support:Linux, Windows, Mac OSx
- Product weight:15.0000 kg
- Package weight:22.5800 kg
- Product size:60.00 x 76.00 x 62.00 cm / 23.62 x 29.92 x 24.41 inches
- Package size:82.00 x 75.00 x 30.00 cm / 32.28 x 29.53 x 11.81 inches
- Packing Contents:1 x Creality3D Printer DIY Kit, 1 x English manual
Key Features...
- Superior printing scale of 500x500x500mm, outstanding building volume.
- All In One (AIO) controller module served with separated controlling units and mechanic structures, further upscaling the printer.
- Dual bearing Delrin solid V wheels with unique V-slot rails generating, less noise and better performance.
- Industrial-grade circuit boards can continuously print for 200 hours without error, stable performance is guaranteed.
- Arrived semi-assembled, fully assemble the kit requires only 10 minutes.
Creality3D CR-10S5 Enlarged Version 3D Printer
500x500x500mm Large Volume Printing
- This 3D printer has the amazingly large volume for printing, which can continuously print for 200 hours without error. This large volume allows you to print small things and also large objects, no worry of getting cut because the object is too large.
DIY Kit
- Printer comes semi-assembled while solving the transportation problem, also save you a lot of time for assemble. You just need to take additional about 10 minutes to assemble the kit, and you can enjoy the fun of 3D printing.
Memory Card Offline Print
- Offline printing, save you trouble of getting wire for network for the printer, with the memory card, printing is more convenient.
Detailed Upgrades
- Airline industry hot swappable plugs, hand tighten nuts for heat bed leveling. Providing stable and excellent performance for the printing.
Disclaimer:
- Please read and follow the user manual carefully before you assemble or operate the 3D printer.
- Modification and customization of the 3D printer are strictly forbidden. We will take no responsibility for any problems resulting from modifications.
- Always use the correct AC voltage for your region.
- Please do not place the 3D printer near flammable / combustible materials, or any heat sources.
- Use the 3D printer only in properly ventilated areas. Maintain a safe distance from the printer.
Specification
- Brand:Creality3D
- Type:DIY
- Model:CR - 10s5
- Engraving Accuracy:+ / -0.1mm
- Frame material:Aluminum
- Nozzle diameter:0.4mm
- Product forming size:500 x 500 x 500mm
- Memory card offline print:SD card
- Print speed:normally 60 – 80mm/s, max. 150mm/s
- Supporting material:Wood,Copper,ABS,TPU,Carbon Fiber,PLA
- Material diameter:1.75mm
- File format:STL,G-code,OBJ
- Host computer software:Repetier-Host,Cura,Simplify3D
- Packing Type:un-assembled packing
- System support:Linux, Windows, Mac OSx
- Product weight:15.0000 kg
- Package weight:22.5800 kg
- Product size:60.00 x 76.00 x 62.00 cm / 23.62 x 29.92 x 24.41 inches
- Package size:82.00 x 75.00 x 30.00 cm / 32.28 x 29.53 x 11.81 inches
- Packing Contents:1 x Creality3D Printer DIY Kit, 1 x English manual
Key Features...
- Superior printing scale of 500x500x500mm, outstanding building volume.
- All In One (AIO) controller module served with separated controlling units and mechanic structures, further upscaling the printer.
- Dual bearing Delrin solid V wheels with unique V-slot rails generating, less noise and better performance.
- Industrial-grade circuit boards can continuously print for 200 hours without error, stable performance is guaranteed.
- Arrived semi-assembled, fully assemble the kit requires only 10 minutes.
Creality3D CR-10S5 Enlarged Version 3D Printer
500x500x500mm Large Volume Printing
This 3D printer has the amazingly large volume for printing, which can continuously print for 200 hours without error. This large volume allows you to print small things
and also large objects, no worry of getting cut because the object is too large.
DIY Kit
Printer comes semi-assembled while solving the transportation problem, also save you a lot of time for assemble. You just need to take additional about 10 minutes to
assemble the kit, and you can enjoy the fun of 3D printing.
Memory Card Offline Print
Offline printing, save you trouble of getting wire for network for the printer, with the memory card, printing is more convenient.
Detailed Upgrades
Airline industry hot swappable plugs, hand tighten nuts for heat bed leveling. Providing stable and excellent performance for the printing.
Disclaimer:
- Please read and follow the user manual carefully before you assemble or operate the 3D printer.
- Modification and customization of the 3D printer are strictly forbidden. We will take no responsibility for any problems resulting from modifications.
- Always use the correct AC voltage for your region.
- Please do not place the 3D printer near flammable / combustible materials, or any heat sources.
- Use the 3D printer only in properly ventilated areas. Maintain a safe distance from the printer.
Specification
- Brand:Creality3D
- Type:DIY
- Model:CR - 10s5
- Engraving Accuracy:+ / -0.1mm
- Frame material:Aluminum
- Nozzle diameter:0.4mm
- Product forming size:500 x 500 x 500mm
- Memory card offline print:SD card
- Print speed:normally 60 – 80mm/s, max. 150mm/s
- Supporting material:Wood,Copper,ABS,TPU,Carbon Fiber,PLA
- Material diameter:1.75mm
- File format:STL,G-code,OBJ
- Host computer software:Repetier-Host,Cura,Simplify3D
- Packing Type:un-assembled packing
- System support:Linux, Windows, Mac OSx
- Product weight:15.0000 kg
- Package weight:22.5800 kg
- Product size:60.00 x 76.00 x 62.00 cm / 23.62 x 29.92 x 24.41 inches
- Package size:82.00 x 75.00 x 30.00 cm / 32.28 x 29.53 x 11.81 inches
- Packing Contents:1 x Creality3D Printer DIY Kit, 1 x English manual
Key Features...
- Superior printing scale of 500x500x500mm, outstanding building volume.
- All In One (AIO) controller module served with separated controlling units and mechanic structures, further upscaling the printer.
- Dual bearing Delrin solid V wheels with unique V-slot rails generating, less noise and better performance.
- Industrial-grade circuit boards can continuously print for 200 hours without error, stable performance is guaranteed.
- Arrived semi-assembled, fully assemble the kit requires only 10 minutes.
Creality3D CR-10S5 Enlarged Version 3D Printer
500x500x500mm Large Volume Printing
This 3D printer has the amazingly large volume for printing, which can continuously print for 200 hours without error. This large volume allows you to print small things
and also large objects, no worry of getting cut because the object is too large.
DIY Kit
Printer comes semi-assembled while solving the transportation problem, also save you a lot of time for assemble. You just need to take additional about 10 minutes to
assemble the kit, and you can enjoy the fun of 3D printing.
Memory Card Offline Print
Offline printing, save you trouble of getting wire for network for the printer, with the memory card, printing is more convenient.
Detailed Upgrades
Airline industry hot swappable plugs, hand tighten nuts for heat bed leveling. Providing stable and excellent performance for the printing.
Specification
- Model Number: CR-10S
- Layers Software: Cura/Repetier-Host
- Gift: Filaments +Hotbed +SD card +Tools
- Printing Method: TF card/ On Line / Off Line, SD card(off-line), contact to the PC(on-line)
- Software supporting : PROE, Solid-works, UG, 3d Max, Rhino 3D design software, etc
- Printing Size : 300*300*400mm
- File Format: STL, OBJ, G-Code, JPG
- Layer Thickness: 0.05-0.4mm (adjustable)
- Brand Name: CREALITY 3D
- 3D Technology: FDM
- Nozzle Diameter: Standard 0.4mm(can be changed to 0.3/0.2mm)
- Printing accuracy：±0.1mm
- Printing Speed：Normal: 80mm/s, Max.: 200mm/s
- Body Structure: Imported V-Slot Aluminum Bearings
- Color Print Speed: Normal
- Filaments: 1.75mm PLA, ABS, TPU, Copper, Wood, Carbon Fiber, Gradient
- Operating System: Linux,Windows,OSX
Package includes:
- 1 * 3D printer
- 1 * English manual
Key Features...
- Double gear extrusion mechanism and auto leveling for higher performance experience.
- Easy assembly, delivery with three sets, just need about 10 minutes to assemble well.
- Prints size of 300 * 300 * 400 mm/11.81 * 11.81 * 15.75 inch. No longer will you be limited to small models.
- Industrial-grade PCB can continuously print for 200 hours without error, but with matures printing technology and stable performance.
Creality3D CR-10S 3D Printer
300 * 300 * 400 mm Large Volume Printing
300 * 300 * 400 mm/11.81 * 11.81 * 15.75 inch large volume for printing, which can continuously print for 200 hours without pressure. This large volume allows you to
print small things and also large objects, no more limit to only small models.
Easy DIY Kit
Printer delivered with three sets, save you a lot of time for assemble. You just need to take additional about 10 minutes to assemble the kit, and you can enjoy the fun of
3D printing.
Machine Precision
High precision imported Aluminum V-slot Bearing + precision roller with high positioning accuracy, move smoothly,print faster.
Heating Bed
Industrial grade aluminum alloy platform and special tempered glass to ensure the formation of flat and to prevent wear and tear. Easy for you to take out the model
without damage or tear.
Easy Wiring:
All wires are attached with labels, no need to worry about wrong wiring. All you have to do is hook everything up accordingly.
Specification
- Model Number: CR-10S
- Layers Software: Cura/Repetier-Host
- Gift: Filaments +Hotbed +SD card +Tools
- Printing Method: TF card/ On Line / Off Line, SD card(off-line), contact to the PC(on-line)
- Software supporting : PROE, Solid-works, UG, 3d Max, Rhino 3D design software, etc
- Printing Size : 300*300*400mm
- File Format: STL, OBJ, G-Code, JPG
- Layer Thickness: 0.05-0.4mm (adjustable)
- Brand Name: CREALITY 3D
- 3D Technology: FDM
- Nozzle Diameter: Standard 0.4mm(can be changed to 0.3/0.2mm)
- Printing accuracy：±0.1mm
- Printing Speed：Normal: 80mm/s, Max.: 200mm/s
- Body Structure: Imported V-Slot Aluminum Bearings
- Color Print Speed: Normal
- Filaments: 1.75mm PLA, ABS, TPU, Copper, Wood, Carbon Fiber, Gradient
- Operating System: Linux,Windows,OSX
Package includes:
- 1 * 3D printer
- 1 * English manual
Key Features...
- Double gear extrusion mechanism and auto leveling for higher performance experience.
- Easy assembly, delivery with three sets, just need about 10 minutes to assemble well.
- Prints size of 300 * 300 * 400 mm/11.81 * 11.81 * 15.75 inch. No longer will you be limited to small models.
- Industrial-grade PCB can continuously print for 200 hours without error, but with matures printing technology and stable performance.
Creality3D CR-10S 3D Printer
300 * 300 * 400 mm Large Volume Printing
300 * 300 * 400 mm/11.81 * 11.81 * 15.75 inch large volume for printing, which can continuously print for 200 hours without pressure. This large volume allows you to
print small things and also large objects, no more limit to only small models.
Easy DIY Kit
Printer delivered with three sets, save you a lot of time for assemble. You just need to take additional about 10 minutes to assemble the kit, and you can enjoy the fun of
3D printing.
Machine Precision
High precision imported Aluminum V-slot Bearing + precision roller with high positioning accuracy, move smoothly,print faster.
Heating Bed
Industrial grade aluminum alloy platform and special tempered glass to ensure the formation of flat and to prevent wear and tear. Easy for you to take out the model
without damage or tear.
Easy Wiring:
All wires are attached with labels, no need to worry about wrong wiring. All you have to do is hook everything up accordingly.
Specification
- Model Number: CR-10S
- Layers Software: Cura/Repetier-Host
- Gift: Filaments +Hotbed +SD card +Tools
- Printing Method: TF card/ On Line / Off Line, SD card(off-line), contact to the PC(on-line)
- Software supporting : PROE, Solid-works, UG, 3d Max, Rhino 3D design software, etc
- Printing Size : 300*300*400mm
- File Format: STL, OBJ, G-Code, JPG
- Layer Thickness: 0.05-0.4mm (adjustable)
- Brand Name: CREALITY 3D
- 3D Technology: FDM
- Nozzle Diameter: Standard 0.4mm(can be changed to 0.3/0.2mm)
- Printing accuracy：±0.1mm
- Printing Speed：Normal: 80mm/s, Max.: 200mm/s
- Body Structure: Imported V-Slot Aluminum Bearings
- Color Print Speed: Normal
- Filaments: 1.75mm PLA, ABS, TPU, Copper, Wood, Carbon Fiber, Gradient
- Operating System: Linux,Windows,OSX
Package includes:
- 1 * 3D printer
- 1 * English manual
Key Features...
- Double gear extrusion mechanism and auto leveling for higher performance experience.
- Easy assembly, delivery with three sets, just need about 10 minutes to assemble well.
- Prints size of 300 * 300 * 400 mm/11.81 * 11.81 * 15.75 inch. No longer will you be limited to small models.
- Industrial-grade PCB can continuously print for 200 hours without error, but with matures printing technology and stable performance.
Creality3D CR-10S 3D Printer
300 * 300 * 400 mm Large Volume Printing
300 * 300 * 400 mm/11.81 * 11.81 * 15.75 inch large volume for printing, which can continuously print for 200 hours without pressure. This large volume allows you to
print small things and also large objects, no more limit to only small models.
Easy DIY Kit
Printer delivered with three sets, save you a lot of time for assemble. You just need to take additional about 10 minutes to assemble the kit, and you can enjoy the fun of
3D printing.
Machine Precision
High precision imported Aluminum V-slot Bearing + precision roller with high positioning accuracy, move smoothly,print faster.
Heating Bed
Industrial grade aluminum alloy platform and special tempered glass to ensure the formation of flat and to prevent wear and tear. Easy for you to take out the model
without damage or tear.
Easy Wiring:
All wires are attached with labels, no need to worry about wrong wiring. All you have to do is hook everything up accordingly.
- Brand Name: CREALITY 3D
- Model Number: CREALITY 3D CR-X
- Color Print Speed: Normal
- Layers Software: Cura/Repetier-Host
- Printing Method: TF card/ On Line / Off Line
- Software supporting : PROE, Solid-works, UG, 3d Max, Rhino 3D design software, etc
- Printing Size : 300*300*400mm/270*270*400mm
- File Format: STL/OBJ/G-Code
- Layer Thickness: 0.05-0.4mm
- Free Gift: Filaments+Hotbed +SD card +Tools
- Nozzle Diameter: Standard 0.4mm(can be changed to 0.3/0.2mm)
- Body Structure: Imported V-Slot Aluminum Bearings
- Filaments: 1.75mm PLA, ABS, TPU, Copper, Wood, Carbon Fiber, Gradient
Package includes:
- 1 x 3D Printer
- 1 * English Manual
Key Features...
- Dual color nozzles allow you to make two color printing.
- Large size touch screen, humanized design, easy operation.
- Glue-free printing platform, deduce adhesion after cooling, easy to take out the models.
- Dual fan cooling system, fast cooling, better cooling effect and higher efficiency.
CREALITY CR-X 3D Printer
Integrated Design.
The exterior design of the profiled sheet metal base is used to store most of the electronic components in the sheet metal bottom case.
Carboloy Silicon Printing Platform.
No need to use glue, perfect bonding with filament at 60℃, reduce adhesion after cooling.
The model and platform are easy to separate, and the model is easy to remove after printing is done.
Automatic Adjustment of Broadband Power Supply.
Widescreen power supply for 110-240V voltage environment. No need to switch, safer and easier to use. It is necessary to adjust the voltage range of 110/220V according
to different regions.
All Metal Extruder. Single Wire Design.
Better strength, longer service life and self-contained elastic adjustment device, giving you a smoother printing experience.
Only need one wire to connect the base and the gantry, which makes it looks compact and beautiful.
Large Leveling Nuts. Stable Printing.
Ergonomic design large leveling nuts, easy to adjust. The CR-X machine is fully supported. The bottom slide block has 8 pulleys and the bottom profile is relatively solid.
This unique design allows the entire machine to run smoothly when printing.
- Integrated modular design, simple but advanced.
- Quick installation for the two modules, save you time and efforts, easy operation.
- 30 degree tilted display, humanized design, easy to read the screen and more convenient to operate.
- Resume print after power off. This printer adds the power failure continued function to make sure the model can be printed normally.
- Specification
- Brand:Creality3D
- Type:DIY
- Model:CR20
- Forming size: 220*220*250mm
- Platform size: 235*235mm
- Power: 24V 270W
- Power failure detection: Standard
- Max nozzle temperature: 260℃
- Max hot bed temperature: 100℃
- Power parameters: 110/220V AC 50/60Hz
- Product size:42.00*41.00*47.00 cm / 16.54*16.14*18.5 inches
- Product weight:7.50 kg
- Package size:47.50 x 46.00 x 27.00 cm / 18.7 x 18.11 x 10.63 inches
- Package weight:9.50 kg
- Packing Contents:
- 1 x 3D Printer
- 1 * English Manual
Key Features...
- Integrated one-piece appearance, professional and outstanding.
- Humanized design, easy operation.
- High-quality hardwares ensure stable performance.
- Highly integrated module provides fluent printing.
- Patented technology, precise, long time printing, smooth and evenly.
- Quick remove self-adhesive platform, easy to take out the models.
- Model Number: Creality Ender-3 Pro
- Body Structure: Imported V-Slot Aluminum
- Layers Software : Cura/Repetier-Host
- Nozzle Diameter : Standard 0.4mm
- Printing Method : TF card/ On Line / Off Line
- Brand Name: CREALITY 3D
- File Format : STL/OBJ/G-Code
- Color Print Speed: Normal
- Layer Thickness : 0.05-0.4mm
- Filaments : 1.75mm PLA ABS TPU Copper Wood
- Printing size : 220*220*250mm
- Gift : Filaments+Hotbed +SD card +Tools
Package includes:
- 1 * 3D Printer
- 1 * English Manual
Key Features...
- Imported V-Slot aluminum body structure, ensure a better performance and fluent printing
- Support printing methods like TF card/ On Line / Off Line, very convenient for those with no wired network.
- 220*220*250mm printing size, enough for you to try ptinting many kinds of models, no limit to only small ones.
- Advanced power supply to ensure safer and faster heating of all necessary components.
CREALITY 3D Ender-3 PRO 3D Printer
Superior Printing Surface
All new state of the art 'C-MAG' magnetic bed,is completely removable and flexible.The textured surface adheres to all types of filament better than traditional methods
such as tape, glue, or hairspray. No more model warping on larger prints! Once the model is finished printing, remove the magnetic upper from the lower and bend or flex
the print surface to watch the model effortlessly pop off the printing surface.
Precisely Manufactured
High precision CNC machining techniques used for all metal brackets and mounts, guarantees precise positioning and an all around more stable structure.
Enhanced Bed Leveling
All new ergonomically designed larger bed leveling nuts makes leveling the bed much easier and more precise, which makes sure you can spend more time printing, and
less time leveling.
DIY Assembly KIT
Enjoy more fun of DIY, easier to realize the innovative transformation of the appearance and meet more of your printing needs.
Resume Printing While Power Off
This 3D printer has the function that safely protect the power supply, and can help achieving long time printing.
- Brand Name: CREALITY 3D
- Model Number: Ender-3
- Layers Software: Cura/Repetier-Host
- Printing Method: TF card/ On Line / Off Line
- Printing size: 220*220*250mm
- Software supporting : PROE, Solid-works, UG, 3d Max, Rhino 3D design software, etc
- File Format: STL/OBJ/G-Code
- Layer Thickness: 0.05-0.4mm
- Nozzle Diameter: Standard 0.4mm(can be changed to 0.3/0.2mm)
- Body Structure: Imported V-Slot Aluminum Bearings
- Color Print Speed: Normal
- Filaments: 1.75mm PLA, ABS, TPU, Copper, Wood, Carbon Fiber, Gradient
- Gift: Filaments+Hotbed +SD card +Tools
Package includes:
- 1 * 3D printer
- 1 * English manual
Key Features...
Equipped with V-slot cooperate with Prusa I3 frame, higher performance.
Extremely innovative design, following the step of the trend, integrating with classic elements.
Printing size 220*220*250mm, plenty enough for you to print many kinds of models.
Only 10 minutes with 20 screws ssembly before the first printing, simple assembly but more stable performance.
CREALITY Ender-3 3D Printer
- Big Printing Size
Super Printing size with one-piece structure, save space but building the world.
- Advanced Technology
MK-10 Extruder greatly reduces plugging risk and bad extrusion. Adopts V-slot with wheel, which is noiseless, smoothly and durable. You can enjoy the fun for 3D printing and no need to worry about malfunctions.
- Power Protections
Safely protected power supply and additional power cut protection function, long time printing will no longer be a problem. These functions will protect the machine during a long working time.
- Fast Heating
Reach 110℃ for hotbed in about 5 minutes, meet the needs of fast heating.
- High Precision
CNC machining of Y-rail mounting groove to make sure precise positioning and keep the stable frame with High-precision printing quality. Big hand twist nut, make the print platform easier to level.
Specification
- Model Number: CR-10S
- Layers Software: Cura/Repetier-Host
- Gift: Filaments +Hotbed +SD card +Tools
- Printing Method: TF card/ On Line / Off Line, SD card(off-line), contact to the PC(on-line)
- Software supporting : PROE, Solid-works, UG, 3d Max, Rhino 3D design software, etc
- Printing Size : 300*300*400mm
- File Format: STL, OBJ, G-Code, JPG
- Layer Thickness: 0.05-0.4mm (adjustable)
- Brand Name: CREALITY 3D
- 3D Technology: FDM
- Nozzle Diameter: Standard 0.4mm(can be changed to 0.3/0.2mm)
- Printing accuracy：±0.1mm
- Printing Speed：Normal: 80mm/s, Max.: 200mm/s
- Body Structure: Imported V-Slot Aluminum Bearings
- Color Print Speed: Normal
- Filaments: 1.75mm PLA, ABS, TPU, Copper, Wood, Carbon Fiber, Gradient
- Operating System: Linux,Windows,OSX
Package includes:
- 1 * 3D printer
- 1 * English manual
Key Features...
- Double gear extrusion mechanism and auto leveling for higher performance experience.
- Easy assembly, delivery with three sets, just need about 10 minutes to assemble well.
- Prints size of 300 * 300 * 400 mm/11.81 * 11.81 * 15.75 inch. No longer will you be limited to small models.
- Industrial-grade PCB can continuously print for 200 hours without error, but with matures printing technology and stable performance.
Creality3D CR-10S 3D Printer
300 * 300 * 400 mm Large Volume Printing
300 * 300 * 400 mm/11.81 * 11.81 * 15.75 inch large volume for printing, which can continuously print for 200 hours without pressure. This large volume allows you to
print small things and also large objects, no more limit to only small models.
Easy DIY Kit
Printer delivered with three sets, save you a lot of time for assemble. You just need to take additional about 10 minutes to assemble the kit, and you can enjoy the fun of
3D printing.
Machine Precision
High precision imported Aluminum V-slot Bearing + precision roller with high positioning accuracy, move smoothly,print faster.
Heating Bed
Industrial grade aluminum alloy platform and special tempered glass to ensure the formation of flat and to prevent wear and tear. Easy for you to take out the model
without damage or tear.
Easy Wiring:
All wires are attached with labels, no need to worry about wrong wiring. All you have to do is hook everything up accordingly.
Specification
- Model Number: CR-10S
- Layers Software: Cura/Repetier-Host
- Gift: Filaments +Hotbed +SD card +Tools
- Printing Method: TF card/ On Line / Off Line, SD card(off-line), contact to the PC(on-line)
- Software supporting : PROE, Solid-works, UG, 3d Max, Rhino 3D design software, etc
- Printing Size : 300*300*400mm
- File Format: STL, OBJ, G-Code, JPG
- Layer Thickness: 0.05-0.4mm (adjustable)
- Brand Name: CREALITY 3D
- 3D Technology: FDM
- Nozzle Diameter: Standard 0.4mm(can be changed to 0.3/0.2mm)
- Printing accuracy：±0.1mm
- Printing Speed：Normal: 80mm/s, Max.: 200mm/s
- Body Structure: Imported V-Slot Aluminum Bearings
- Color Print Speed: Normal
- Filaments: 1.75mm PLA, ABS, TPU, Copper, Wood, Carbon Fiber, Gradient
- Operating System: Linux,Windows,OSX
Package includes:
- 1 * 3D printer
- 1 * English manual
Key Features...
- Double gear extrusion mechanism and auto leveling for higher performance experience.
- Easy assembly, delivery with three sets, just need about 10 minutes to assemble well.
- Prints size of 300 * 300 * 400 mm/11.81 * 11.81 * 15.75 inch. No longer will you be limited to small models.
- Industrial-grade PCB can continuously print for 200 hours without error, but with matures printing technology and stable performance.
Creality3D CR-10S 3D Printer
300 * 300 * 400 mm Large Volume Printing
300 * 300 * 400 mm/11.81 * 11.81 * 15.75 inch large volume for printing, which can continuously print for 200 hours without pressure. This large volume allows you to
print small things and also large objects, no more limit to only small models.
Easy DIY Kit
Printer delivered with three sets, save you a lot of time for assemble. You just need to take additional about 10 minutes to assemble the kit, and you can enjoy the fun of
3D printing.
Machine Precision
High precision imported Aluminum V-slot Bearing + precision roller with high positioning accuracy, move smoothly,print faster.
Heating Bed
Industrial grade aluminum alloy platform and special tempered glass to ensure the formation of flat and to prevent wear and tear. Easy for you to take out the model
without damage or tear.
Easy Wiring:
All wires are attached with labels, no need to worry about wrong wiring. All you have to do is hook everything up accordingly.
Specification
- Model Number: CR-10S
- Layers Software: Cura/Repetier-Host
- Gift: Filaments +Hotbed +SD card +Tools
- Printing Method: TF card/ On Line / Off Line, SD card(off-line), contact to the PC(on-line)
- Software supporting : PROE, Solid-works, UG, 3d Max, Rhino 3D design software, etc
- Printing Size : 300*300*400mm
- File Format: STL, OBJ, G-Code, JPG
- Layer Thickness: 0.05-0.4mm (adjustable)
- Brand Name: CREALITY 3D
- 3D Technology: FDM
- Nozzle Diameter: Standard 0.4mm(can be changed to 0.3/0.2mm)
- Printing accuracy：±0.1mm
- Printing Speed：Normal: 80mm/s, Max.: 200mm/s
- Body Structure: Imported V-Slot Aluminum Bearings
- Color Print Speed: Normal
- Filaments: 1.75mm PLA, ABS, TPU, Copper, Wood, Carbon Fiber, Gradient
- Operating System: Linux,Windows,OSX
Package includes:
- 1 * 3D printer
- 1 * English manual
Key Features...
- Double gear extrusion mechanism and auto leveling for higher performance experience.
- Easy assembly, delivery with three sets, just need about 10 minutes to assemble well.
- Prints size of 300 * 300 * 400 mm/11.81 * 11.81 * 15.75 inch. No longer will you be limited to small models.
- Industrial-grade PCB can continuously print for 200 hours without error, but with matures printing technology and stable performance.
Creality3D CR-10S 3D Printer
300 * 300 * 400 mm Large Volume Printing
300 * 300 * 400 mm/11.81 * 11.81 * 15.75 inch large volume for printing, which can continuously print for 200 hours without pressure. This large volume allows you to
print small things and also large objects, no more limit to only small models.
Easy DIY Kit
Printer delivered with three sets, save you a lot of time for assemble. You just need to take additional about 10 minutes to assemble the kit, and you can enjoy the fun of
3D printing.
Machine Precision
High precision imported Aluminum V-slot Bearing + precision roller with high positioning accuracy, move smoothly,print faster.
Heating Bed
Industrial grade aluminum alloy platform and special tempered glass to ensure the formation of flat and to prevent wear and tear. Easy for you to take out the model
without damage or tear.
Easy Wiring:
All wires are attached with labels, no need to worry about wrong wiring. All you have to do is hook everything up accordingly.
- Integrated modular design, simple but advanced.
- Quick installation for the two modules, save you time and efforts, easy operation.
- 30 degree tilted display, humanized design, easy to read the screen and more convenient to operate.
- Resume print after power off. This printer adds the power failure continued function to make sure the model can be printed normally.
- Specification
- Brand:Creality3D
- Type:DIY
- Model:CR20
- Forming size: 220*220*250mm
- Platform size: 235*235mm
- Power: 24V 270W
- Power failure detection: Standard
- Max nozzle temperature: 260℃
- Max hot bed temperature: 100℃
- Power parameters: 110/220V AC 50/60Hz
- Product size:42.00*41.00*47.00 cm / 16.54*16.14*18.5 inches
- Product weight:7.50 kg
- Package size:47.50 x 46.00 x 27.00 cm / 18.7 x 18.11 x 10.63 inches
- Package weight:9.50 kg
- Packing Contents:
- 1 x 3D Printer
- 1 * English Manual
Key Features...
- Integrated one-piece appearance, professional and outstanding.
- Humanized design, easy operation.
- High-quality hardwares ensure stable performance.
- Highly integrated module provides fluent printing.
- Patented technology, precise, long time printing, smooth and evenly.
- Quick remove self-adhesive platform, easy to take out the models.
- Model Number: Creality Ender-3 Pro
- Body Structure: Imported V-Slot Aluminum
- Layers Software : Cura/Repetier-Host
- Nozzle Diameter : Standard 0.4mm
- Printing Method : TF card/ On Line / Off Line
- Brand Name: CREALITY 3D
- File Format : STL/OBJ/G-Code
- Color Print Speed: Normal
- Layer Thickness : 0.05-0.4mm
- Filaments : 1.75mm PLA ABS TPU Copper Wood
- Printing size : 220*220*250mm
- Gift : Filaments+Hotbed +SD card +Tools
Package includes:
- 1 * 3D Printer
- 1 * English Manual
Key Features...
- Imported V-Slot aluminum body structure, ensure a better performance and fluent printing
- Support printing methods like TF card/ On Line / Off Line, very convenient for those with no wired network.
- 220*220*250mm printing size, enough for you to try ptinting many kinds of models, no limit to only small ones.
- Advanced power supply to ensure safer and faster heating of all necessary components.
CREALITY 3D Ender-3 PRO 3D Printer
Superior Printing Surface
All new state of the art 'C-MAG' magnetic bed,is completely removable and flexible.The textured surface adheres to all types of filament better than traditional methods
such as tape, glue, or hairspray. No more model warping on larger prints! Once the model is finished printing, remove the magnetic upper from the lower and bend or flex
the print surface to watch the model effortlessly pop off the printing surface.
Precisely Manufactured
High precision CNC machining techniques used for all metal brackets and mounts, guarantees precise positioning and an all around more stable structure.
Enhanced Bed Leveling
All new ergonomically designed larger bed leveling nuts makes leveling the bed much easier and more precise, which makes sure you can spend more time printing, and
less time leveling.
DIY Assembly KIT
Enjoy more fun of DIY, easier to realize the innovative transformation of the appearance and meet more of your printing needs.
Resume Printing While Power Off
This 3D printer has the function that safely protect the power supply, and can help achieving long time printing.
- Brand Name: CREALITY 3D
- Model Number: Ender-3
- Layers Software: Cura/Repetier-Host
- Printing Method: TF card/ On Line / Off Line
- Printing size: 220*220*250mm
- Software supporting : PROE, Solid-works, UG, 3d Max, Rhino 3D design software, etc
- File Format: STL/OBJ/G-Code
- Layer Thickness: 0.05-0.4mm
- Nozzle Diameter: Standard 0.4mm(can be changed to 0.3/0.2mm)
- Body Structure: Imported V-Slot Aluminum Bearings
- Color Print Speed: Normal
- Filaments: 1.75mm PLA, ABS, TPU, Copper, Wood, Carbon Fiber, Gradient
- Gift: Filaments+Hotbed +SD card +Tools
Package includes:
- 1 * 3D printer
- 1 * English manual
Key Features...
Equipped with V-slot cooperate with Prusa I3 frame, higher performance.
Extremely innovative design, following the step of the trend, integrating with classic elements.
Printing size 220*220*250mm, plenty enough for you to print many kinds of models.
Only 10 minutes with 20 screws ssembly before the first printing, simple assembly but more stable performance.
CREALITY Ender-3 3D Printer
- Big Printing Size
Super Printing size with one-piece structure, save space but building the world.
- Advanced Technology
MK-10 Extruder greatly reduces plugging risk and bad extrusion. Adopts V-slot with wheel, which is noiseless, smoothly and durable. You can enjoy the fun for 3D printing and no need to worry about malfunctions.
- Power Protections
Safely protected power supply and additional power cut protection function, long time printing will no longer be a problem. These functions will protect the machine during a long working time.
- Fast Heating
Reach 110℃ for hotbed in about 5 minutes, meet the needs of fast heating.
- High Precision
CNC machining of Y-rail mounting groove to make sure precise positioning and keep the stable frame with High-precision printing quality. Big hand twist nut, make the print platform easier to level.
Description:
Product name: PEI Cold Printing Film Panel
Gum: 468p
Features: easy to use
Temperature: ≤ 100 ℃
Model: 300 * 300 * 0.3 mm Pei with back glue
PEI:
PEI refers to polyetherimide (Polyetherimide), it also refers to personnel efficiency indicators. PEI (polyetherimide) is an amber transparent solid. Without any additives, PEI raw material particles have inherent flame retardancy and low smoke. The oxygen index is 47%, and the combustion rating is UL94-V-0. The density is 1.28~1.42g/cm3. PEI has strong high temperature stability, even non-reinforced PEI, still has good toughness and strength. Therefore, the superior thermal stability of PEI can be used to make high-temperature heat-resistant devices. It has excellent mechanical properties, electrical insulation properties, radiation resistance, high and low temperature resistance and abrasion resistance, and can transmit microwaves.
PEI boards are non-crystalline plastics. It is an amorphous high-performance polymer. It is made of engineering plastics made of amorphous PEI (polyetherimide) through extruder at high temperature.
Packing list:
300*300*0.3mm PEI Cold Printing Film Panel*1
Note:
The color deviation is subject to actual system configuration and slight dimension difference is allowed due to manual measurement.
--Easy to use, the back glue has been pasted, easy operation.
--Flexible, detachable, very well adheres to the magnet.
--Suitable for all kinds of fibers, especially for PLA and ABS.
--Free cleaning, just bend the board slightly, then cool and then print.
--Never warp, never rust.
Description:
Product name: Silicone Heated Bed
Color: Orange
Material: silicone rubber (with 3M back glue)
Size: 120mm x 120mm
Voltage: 12V
Power: 120W
Net weight: 95g
The working temperature should be lower than 200 ℃ for continuous use
Tips:
1.The maximum temperature of the silicone heating plate is about 200 degrees (silicone material is resistant to temperature), and it is easy to burn out if it exceeds the heating plate. The silica gel heating plate cannot be used in water, and it will be no problem if the surface is stained with water during use.
2.The silicone pad heats up quickly, please take anti-scalding measures.
Packing list:
120x120mm 12V 120W Silicone Heated Bed*1
Note:
The color deviation is subject to actual system configuration and slight dimension difference is allowed due to manual measurement.
--3M adhesive is easy to install.
--Fast heating, silicone rubber hot bed, low power, high temperature, uniform heat transfer, long life, and high thermal efficiency conversion.
--Wonderful silica gel heater for your 3D printer heat-bed.
--Waterproof and non-toxic.
Description:
Product name: Photosensitive Resin Filter Funnel
Features: thickened version
Color: white
Type: photosensitive resin filter funnel
Packing list:
10 pcs*Photosensitive Resin Filter Funnel
Note:
The color deviation is subject to actual system configuration and slight dimension difference is allowed due to manual measurement.
--Thick paper, good filtration, saving materials.
--Very practical 3D printer filter funnel.
--Use high-quality paper, durable and environmentally friendly.
--Durable, easy to use, sturdy, 3D printer accessories.
--The Funnel is designed to be collapsible or folding, easy to use and store.
Description:
Item type:tool
CNC Expansion Board
Version: V3.0
Color: Red
Size: 68 x 53 x 18mm / 2.67 x 2.08 x 0.7in
Voltage: DC 12V to 36V (only DRV8825 driver can handle up to 36V, so please consider voltage for power supply)
4pcs A4988 Driver
Color: Red
Size: 20 x 15mm / 0.78 x 0.59in
Thermal Shutdown Circuit: Yes
Cross Current Protection: Yes
Ground Fault Protection: Yes
Short Circuit Protection: Yes
Compatible Logic Voltage: 3.3V and 5V
Five Step Modes: Full, 1/2, 1/4, 1/8 and 1/16
Mix with slow current attenuation model.
Internal UVLO and low RDS (on) output.
Automatic current attenuation mode Detection/Select.
Phase-in rectifier, low power consumption.
Warning: Connecting or disconnecting stepping motor while driver is powered on might damage driver.
4pcs Heat Sinks
Size: 8 x 8mm / 0.31 x 0.31in
Package includes:
1 x V3 Extension Board
4 x Drivers
4 x Heat Sinks
Notes:
This is a set of disassembled part, and you need basic soldering skills to solder them together.
The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
Use removable A4988 or DRV8825 compatible stepping driver.
The extension board can be used for engraving machine or 3D printer driver.
Compatible with GRBL 0.8. Open-source firmware operated on Arduino UNO, converting G code command into stepping signal.
PWM spindle and direction pin, 4 shaft support (X, Y, Z, A - you can copy X, Y, Z or use pin D12 and D13 customize firmware perform complete shaft 4).
Compact design, stepping motor can connect 4 pin connectors or be soldered.
Description:
Phone Type:3D Printer
model tech:fdm
printing size:300*300*400mm
printing speed:180mm/S,normal 30-60mm/S
presicion:0.1mm
layer thinckness:0.1-0.4mm
nozzle diameter:standard 0.4mm
nozzle number:1
hotbed tem:＜100c
operation system:MAC/linux/Windowsxp/vista/7/8/10
Power rating:350w
Working mode:online or SD slot offline printing
filament diameter:1.75mm
Package includes:
1*3D Printer
Note:
Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
The operation system:MAC/linux/Windowsxp/vista/7/8/10.
Power rating:350w and filament diameter:1.75mm.
printing speed:180mm/S,normal 30-60mm/S and nozzle diameter:standard 0.4mm.
Description:
Product Category:Portable photo printer
Compatible With All Android or IOS Device
Android 8.0 or higher
iOS 10.0.2 or higher
HUAWEI SHARE Need EMUI 9.0.1 or higher
Non Huawei Phone Cannot use HUAWEI SHARE
Connect to Bluetooth (More Wonderful Watch Video)
1.Download For Huawei or Honor Printer on App Store or Android Store
A Open App,Connect Printer
B Select Photos
C Click on the Print
2.For HUAWEI Share Quick Print
A Open Gallery,Select Photos
B Share
C Connection Printer
For HUAWEI Share No Need App Quick Print Need EMUI 9.0.1 or Up
Printing Technology: Zink
Transfer Speed: 10 S
Print Time: 1 Min
Print Size: 50*76mm
Carton Capacity: 10/PCS
System: Android 8.0 Up or iOS 10.0.2 Up
Connection Method: Bluetooth
Battery Capacity: 500mAh
Once Charge Prints: 23/PCS
Packing list:
Portable photo printer * 1
Note:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
- HUAWE Pocket Photo Printer,Print Your Colorful Life.
- Made of premium quality material, non-deforming and smooth edge, solid and wear resistant for a long time use.
- Fine workmanship and stylish design.
- No smell, anti-bacteria, strongly wear resistant
Description:
Name: Template
Size: 214mmx 214mm
Laminate: FR4 1.6 + -0.15mm, 2 layers, 35μm copper
Red: Soldermask - two sides
White: Screen printing - two sides
Power input: 12V or 24v, copper plated holes
Resistance: between 1.0 and 1.2 ohms
Packing list:
1 x Template
1 x box packaging
The colors deviation might differ due to different monitor settings, please kindly understand.
Please tell us first when you have any problem, we will give you the best service and solve the problem ASAP. Thank you so much.
-- Copper plated holes, high strength material and long life service.
-- Resistance between 1.0 and 1.2 ohm.
-- Very good in combination with RUMBA or Taurino Power.
-- Power input: 12V or 24v, copper plated holes.
Description:
Product category: FAN
Rated voltage: 5 V
Dia. cooling fan: 50mm
Cable length: about 750mm
Weight:48g
Package include:
2*fan
Notes:
1-2cm pulse might exist due to manual measurements, please kindly understand. The colors decide might differ due to different monitor settings.
--Fit for Prusa i3 MK3.
--Made of good material, ensures long service time.
--A good part for 3D printer.
Description:
Item type:PEI sheet
Type: PEI
Thickness: 0.2mm
Model: 220*220*0.2mmPEI
Weight: 30g
Package Include:
1 * PEI sheet
Note:
The colors deviation might differ due to different monitor settings.
Using 468MP back glue, has strong adhesion.
Perfect accessories for 3D Printer.
Easy to operate and convenient to use.
Description:
Item Name: 3D printer
Working mode: online or 3D offline (SD card / USB)
Machine size: 358 * 375 * 420mm
Language: English / Chinese
Stepper motor: 1.8 ° C step angle with 1/16 microstep
Positioning accuracy: X / Y
Filament diameter: 1.75mm
Nozzle diameter: 0.4mm (0.3 and 0.5mm are acceptable)
Printing silk: 1.75mm PLA, ABS, TPU, copper, wood, carbon fiber, gradient color, etc.
Display: 3.2-inch full color touch screen
Power: DC 24V / 15A / 360W
Printing speed: ≦ 200ms
Shipping weight: 18kg
File format: STL, Gcode, OBJ (filament disconnection warning and power failure recovery, you can also add wifi)
Layer thickness: 0.05-0.4mm
Highest temperature of bed: 90 ° C
Shaping Technology: Fused Deposition Modeling
Maximum extrusion temperature: 260 ° C
Operating system: Window, MAC, Linux
Accuracy: ± 0.1mm
Package List:
1 * 3D Printer Set
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
TFF touch screen.
Power failure protection.
Rigid metal frame.
Multi-language, detachable platform, auxi liary leveling.
Front view full color touch screen, simplify the machine's operation.
Description:
Item name: 3D printer
Brand: Jiahe 3D koonovo
Model: Pyramid
Machine structure: I3 gantry
Forming technology: FDM
oltage: input 110-240V output 24v15a
Print size: 300 * 300 * 400mm
Machine size: 485 * 485 * 635
Package List:
1 * 3D Printer Kit
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Using TMC2208 motor silent drive, quiet and no noise.
The large print size is 300 * 300 * 400mm, which meets the user's large print requirements.
Double Z axis: dual motor + double screw + double Z axis limit switch to ensure the stability and flatness of the printing platform.
Supports pause and resume when the material is cut to prevent accidents during printing.
3.5-inch high-definition touch screen, easy to operate and support multiple languages.
Description:
Item name: 3D printer
Brand: Jiahe 3D koonovo
Model: Pyramid
Machine structure: I3 gantry
Forming technology: FDM
oltage: input 110-240V output 24v15a
Print size: 300 * 300 * 400mm
Machine size: 485 * 485 * 635
Package List:
1 * 3D Printer Kit
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Using TMC2208 motor silent drive, quiet and no noise.
The large print size is 300 * 300 * 400mm, which meets the user's large print requirements.
Double Z axis: dual motor + double screw + double Z axis limit switch to ensure the stability and flatness of the printing platform.
Supports pause and resume when the material is cut to prevent accidents during printing.
3.5-inch high-definition touch screen, easy to operate and support multiple languages.
Description:
Item name: 3D printer
Model: Elf
Machine structure: corexy
Forming technology: FDM
Voltage: input 110-240V output 24v15a
Print size: 300 * 300 * 330mm
Machine size: 460 * 480 * 600mm
Package List:
1 * 3D Printer Kit
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Core xy structure, stable machine structure, fast printing speed, high precision, quiet and no noise.
Large print size 300 * 300 * 330mm, meet users' large print requirements.
Double Z axis: 4 optical axis + 2 screw rods + 2 Z axis limit switches to ensure the stability and flatness of the printing platform.
It supports the functions of material pause and power failure, which saves time without waste.
3.5-inch high-definition touch screen, easy to operate and support multiple languages.
Description:
Item name: 3D printer
Model: Elf
Machine structure: corexy
Forming technology: FDM
Voltage: input 110-240V output 24v15a
Print size: 300 * 300 * 330mm
Machine size: 460 * 480 * 600mm
Package List:
1 * 3D Printer Kit
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Core xy structure, stable machine structure, fast printing speed, high precision, quiet and no noise.
Large print size 300 * 300 * 330mm, meet users' large print requirements.
Double Z axis: 4 optical axis + 2 screw rods + 2 Z axis limit switches to ensure the stability and flatness of the printing platform.
It supports the functions of material pause and power failure, which saves time without waste.
3.5-inch high-definition touch screen, easy to operate and support multiple languages.
Description:
Item Name: 3D printer
Working mode: online or 3D offline (SD card / USB)
Machine size: 358 * 375 * 420mm
Language: English / Chinese
Stepper motor: 1.8 ° C step angle with 1/16 microstep
Positioning accuracy: X / Y
Filament diameter: 1.75mm
Nozzle diameter: 0.4mm (0.3 and 0.5mm are acceptable)
Printing silk: 1.75mm PLA, ABS, TPU, copper, wood, carbon fiber, gradient color, etc.
Display: 3.2-inch full color touch screen
Power: DC 24V / 15A / 360W
Printing speed: ≦ 200ms
Shipping weight: 18kg
File format: STL, Gcode, OBJ (filament disconnection warning and power failure recovery, you can also add wifi)
Layer thickness: 0.05-0.4mm
Highest temperature of bed: 90 ° C
Shaping Technology: Fused Deposition Modeling
Maximum extrusion temperature: 260 ° C
Operating system: Window, MAC, Linux
Accuracy: ± 0.1mm
Package List:
1 * 3D Printer Set
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
TFF touch screen.
Power failure protection.
Rigid metal frame.
Multi-language, detachable platform, auxi liary leveling.
Front view full color touch screen, simplify the machine's operation.
Description:
Type: pen holder
Color: as shown
Model: Single-hole , double-hole , three-hole
Material: metal
Usage: It can be fixed on books and other articles, and the pen can not fall off at will.
Packing:
1*pen holder
Note: Due to manual measurement, there may be a difference of 1 - 3 cm.Colors deviation might differ due to different monitor settings, please kindly understand.
--Perfect solution for having your pen at hand. Designed for journals, notebooks, planners, calendars.
--Adjustable Loop Diameter, easy and convenient to use.
--The elastic loop accommodates many sizes of pens and pencils.
--The purpose of the pen loop is to make your life easier. The loop firmly holds your pen, strong adhesive and special elastic.
Description:
Item type: Folding Clipboard
Weight: 230g
Fixture size: 10cm
Color: Random color
Plate thickness: 2.5mm
Applicable paper size: A4
Size (width x length): 318*230mm
Material: Leather
Features
-- Eco-friendly material
-- Firm metal clip
-- Comes with leather cover
Package includes:
1 * Folding Clipboard
Notes:
1-2mm error might exist due to manual measurements, please kindly understand. The colors deviation might differ due to different monitor settings.
We provide you with the best product and service. If you have any problem, please let us know, and we will solve the problem ASAP. Thank you so much.
Eco-friendly material, nontoxic and wear resistant.
Firm metal clip inside to tightly hold the papers.
Comes with leather cover for A4 size paper.
A wonderful handy tool for student and office workers.
Description:
Item type: Ink cartridge
Applicable brand models: Xerox S1810 S2010 S2011 S2220 S2420 S2520
Weight: Standard 0.5Kg, high capacity 0.7kg
Size: 420*50*50mm
Package includes:
1 * Ink cartridge
Note:
The colors deviation might differ due to different monitor settings.
We provide you with the best product and service, if you have any problem, please let us know, and we will solve the problem ASAP. Thank you so much.
Made of high quality material, eco-friendly, nontoxic, durable.
Bright color, strong stereoscopic effect and clear effect.
Strict production process, easy to install and use.
Compatible with Xerox:S1810 S2010 S2011 S2220 S2420 S2520.
Description:
Product Type 3D Printer
Molding principle fused deposition model (FDM)
Molding platform size 3D printing: 200*200*200 mm, CNC engraving/cutting: 200*200 mm, laser engraving: 100*190mm
Printing accuracy (+0.1mm)
Print layer thickness 0.1-0.4mm
Nozzle diameter 0.4mm (0.6mm, 0.8mm, 1.0mm, 1.2mm optional)
Printing speed 10-80mm/s
Software requirements
Random software Cura, Simplify 3D
Print data format STL, OBJ, AMF
Operating system Windows XP/Vista/7/10, MAC, Linux
Consumable specifications
Printing materials PLA, ABS, TPU, PVA
Physical parameter
Floor working temperature < 100 degree C
Power requirements Input: AC 100-240V, output: 24V
Other parameters:
Control panel 4.3 Inch Touch Screen
Connection method TF card of fline printing or online printing
Power failure continued support
Product material industrial grade aluminum profile
Product weight 10 kg
Other parameters CNC engraving/cutting:
Support materials: wood, paper, PCB, plastic, etc.
File format: SVG, BMP, NG, PG, DXF
Spindle speed: 4800 rpm Max
With tool size: HRC55 tungsten steel milling cutter 4F 4*1
Drill chuck support range: 0-4mm
Laser engraving:
Support materials: wood, paper, plastic, leather, etc.
File format: SVG, BMP, NG, PG, DXF
Laser power: less than 0.5W
Package includes:
1*Creality CP 01 (with some accessories)
Note:
Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
--3D Printer, Laser engraving, and CNC Cutting.
--Support materials: wood, paper, plastic, leather, etc.
--File format: SVG, BMP, NG, PG, DXF.
--Laser power: less than 0.5W.
--The modules are interchangeable and can be assembled quickly and universally.
- 1